Sharp point tester

EN 71 - Toy safety test equipment

Made of stainless steel
- Rectangular opening of (1.02 ± 0.02) mm by (1.15 ± 0.02) mm located at the end of the cap
- Detection head set back by (0.38 ± 0.02) mm from the cap
- Return spring with a force of 2.5 (-0.3 / +0 N)
- Tool weight (450 ± 10) gr for direct application of the force of 4.5 N
Calibration tool to adjust the penetration distance (0.50 = 0.38 + 0.12 ; ± 0.02 mm) by adjusting the end cap and locking it in position by the clamping ring