-
Baby & Child care
-
EN716-2 - Children’s cots and folding cots
- 7 mm Finger probe for mesh
- Ball chain loop with spherical mass
- Bite tester
- Bottom impactor
- Conical probe ∅25 mm
- Conical probe ∅45 mm
- Conical probe ∅60 mm
- Conical probe ∅65 mm
- Conical probe ∅85 mm
- Cylindrical probe ∅12 mm
- Cylindrical probe ∅18 mm
- Cylindrical probe ∅5 mm
- Cylindrical probe ∅7 mm
- Cylindrical probes Set
- Foothold template
- Large head probe
- Loading pad 100 mm
- Mass 20 kg
- Retaining blocks
- Side impactor
- Small head probe
- Small parts cylinder
- Test dummy
- Test mass
- Test mattress
- V and irregular shaped openings template
- EN1130 - Cribs and cradles
- EN1272 - Table mounted chairs
- EN1273 - Baby walking frames
- EN1400 - Soother test equipment
- EN1466 - Carry cots
-
EN1888 - Stroller test equipment
- Abrasion test device
- Angle measuring device
- Bite tester
- Conical probe for mesh
- Conical probe Ø25 mm
- Conical probe Ø45 mm
- Conical probes set
- Conical probes Ø12 mm
- Conveyor system, ''Irregular surface test'' for strollers
- Durability test bench
- Finger probe with hemispherical end
- Finger probe with hemispherical end
- Finger probe with hemispherical end
- Finger probes with hemispherical end
- Hinged board
- Hip probe
- Inclinable test surface
- Large head probe
- Rigid surface à 10° with stop made of steel for dynamic strength test
- Rotating test surface, 360° at a speed of 4 RPM
- Shape Assessment Probe
- Small parts cylinder
- Test ball
- Test bar
- Test mass A
- Test mass B
- Test mass C
- Test mass D
- Test mass D0
- Test mass F
- Test mass G
- Test mass H
- EN1930 - Safety barriers
-
EN12221-2 - Changing units
- Bath test base
- Finger probe ∅ 12 mm
- Finger probe ∅ 7 mm
- Finger probes
- Head probe 1
- Head probe 2
- Loading pad ∅ 100 mm
- Measuring cone 25mm
- Measuring cone 45 mm
- Measuring cone 65 mm
- Measuring rod for test beam
- Side impacter
- Small parts cylinder
- Steel ball
- Test beam with measuring rods
- Test beam with measuring rods
- Test cylinder
- Test mass
- Tube
-
EN12227 - Playpens for domestic use
- 7 mm probe for mesh
- Ball chain loop with spherical mass
- Base impacter
- Bite tester
- Feeler gauge
- Finger probe ∅ 12 mm
- Finger probe ∅ 7 mm
- Finger probes
- Foothold template
- Hip probe
- Large head probe
- Loading pad ∅ 100
- Mass 15 kg
- Mass 20 kg
- Patin de charge
- Retaining blocks for strength of mesh
- Side impacter
- Small head probe
- Small parts cylinder
- Template for V and irregular shaped openings
- EN12586 - Soother holder
- EN12790 - Baby bouncer
-
EN13209 - Test equipment
- Adult test torso
- Bite tester
- Feeler gauge
- Finger probe for mesh
- Finger probe Ø 12 mm
- Finger probe Ø 7 mm
- Finger probes
- Inclinable platform
- Rotating test surface (360°)
- Small parts cylinder
- Test bench for baby carriers
- Test dummy
- Test mass A
- Test mass A/B
- Test mass B
- Test sphere
- Testdummy C
- Testdummy D
- Testdummy E
-
EN14344 - Child seats for cycles
- Body bag B 12 kg
- Body bag B 18 kg
- Child seat measuring instrument
- Conical probe for mesh Ø7 mm
- Conical probe Ø12 mm
- Conical probe Ø25 mm
- Conical probe Ø45 mm
- Feeler Gauge
- Finger probe Ø7 mm
- Foot bag F 2 kg
- Foot bag F 3 kg
- Foot block A
- Foot block B
- Lateral dynamic test rig
- Rotating test platform 360° at speed of 4 RPM
- Set of 3 conical probes
- Shape assessment probe
- Small Parts Cylinder
- Test dummy D
- Test support structure
- Vertical dynamic test rig
- EN14350 - Drinking test equipment
- EN14372 - Cutlery and feeding utensils
-
EN14988-2 - High chair test equipment
- Angle measuring device
- Beam for height of lateral protection test
- Beam for height of lateral protection test
- Beam for stability test and for measurement of the lateral protection length
- Feeler gauge
- Footrest vertical static load 20 kg
- Impact hammer
- Impactor 23 kg
- Large head probe
- Leg probe
- Load 15 kg
- Loading pad ∅100
- Probe for finger entrapment 12 mm
- Probe for finger entrapment 7 mm
- Probes for finger entrapment
- Rubber mat
- Seat vertical static load 40 kg
- Small loading pad
- Small parts cylinder
- Small torso probe
- Test dummy
- Test load
- Test mass D
- Wedge block
- Wood block
- EN15918 - Cycle trailer
- EN16120 - Chair mounted seats
- EN16232 - Infant swings
- EN16890 - Mattresses for cots and cribs
- EN17072 - Bath tubs
- XPS54-048 - Dispositifs d'aide au bain à usage domestique
- R44 - Child Restraint System
- R129 - Enhanced child restraint system
- ASTM F404 - High Chairs
- ASTM F833 - Carriages and Strollers
- ASTM F1975 - Bicycle Trailers
- ASTM F2388 - Baby changing tables
- ASTM F2549 - Frame Child Carriers
- ASTM F2907 - Sling carriers
- AS/NZS 2088 - Prams and Strollers
- ASTM F1169 - Full-Size Baby Cribs
- AZ/NZS 3629 - Child restraints
- ANSI Z315.1-2012 - Tricycles
- CEN/TR 16512 - Children's slings
-
CEN/TR13387 - Child use and care articles
- Accessibility Probe
- Ball chain with loop
- Bite tester
- Concical probe for mesh 7mm R2.8
- Feeler gauge
- Finger probe 12 mm
- Finger probe 5mm
- Foothold template
- Head probe 0-3 months
- Head probe 12-18 months
- Head probe 18-24 months
- Head probe 24-36 months
- Head probe 3-6 months
- Head probe 36-48 months
- Head probe 6-9 months
- Head probe 9-12 months
- Large head probe
- Large head probe 0-3 months
- Large head probe 12-18 months
- Large head probe 18-24 months
- Large head probe 24-36 months
- Large head probe 3-6months
- Large head probe 36-48 months
- Large head probe 6-9 months
- Large head probe 9-12 months
- Small parts cylinder
- Small torso probe 0-3 months
- Small torso probe 12-18 months
- Small torso probe 18-24 months
- Small torso probe 24-36 months
- Small torso probe 3-6months
- Small torso probe 36-48 months
- Small torso probe 6-9 months
- Small torso probe 9-12 months
- Template A
- Template B
- Test dummy
- V and irregular shaped openings template
-
EN716-2 - Children’s cots and folding cots
-
Toys
-
EN71 - Toy safety test equipment
- 25 mm height step for tip over test
- Accessibility probe A
- Accessibility probe B
- Clamps with jaws ø19 mm
- Digital measuring device for thickness
- Drop test surface set
- Drop test surface set with non-resilient step
- Durability Test for vertically opening hinged lids
- Dynamometer
- Edge test apparatus
- Elastomere coating
- FEELER GAUGE
- Gauge X
- Gaussmeter
- Gripper jaws
- Head probe (<3 months)
- Head probe (<3 Months)
- Improvised projectiles - Discs
- Improvised projectiles - Shafts
- Improvised projectiles - Spheres
- Inclinable platform
- Loads for determination of dynamic strength
- Loads for determination of strength and stability
- Loads for determination of strength and stability
- Loads for determination of strength and stability
- Measurement of elastic constant k of yo-yo balls’ tether
- Measuring device for the durability of mouth-actuated toys
- Measuring rod ∅12 mm
- Measuring rod ∅5 mm
- Measuring rod ∅7 mm
- Measuring rods Set
- Metal disc for compression test
- Nickel disc
- Platform for dynamic strength test
- Platform with adjustable side wheels
- Self-adhesive PTFE tape
- Set of Improvised projectiles
- Set of test template
- Sharp point tester
- SMALL PART CYLINDER
- Steel needle (Leakage of liquid-filled toys)
- Steel plate, thickness 4 mm
- Template A
- Template B
- Template E
- Tension Test Clamp
- Test bench for drop test
- Test blocks
- Test device for the flexibility of metallic wires
- Test rig for length measurements of yo-yo balls’ tether
- Test unit for dynamic strength, 2m/s
- Tip assessment gauge
- Torque clamp
- Torque Tester
- EN71-2 - Flammability - Safety of toys
-
EN71-8 - Activity Toys for domestic use
- Accessory Toggle test device
- Device to measure ropes with a nominal diameter of 10 mm
- Inclination device
- Mesuring rods Set
- Probe C (Torso)
- Probe D (Large head)
- Probe E (Small head)
- Radius gauge
- Straight rod
- Test device and connection points for chains
- Test load < 36 months
- Test load ≥ 36 months
- Test template E for assessment of head and neck entrapment
- Toggle test device
- Typical load fixture for a flexible swing element
-
EN1176 - Playground test equipment
- Finger rod, Ø 8.25 mm
- Mass 69.5 kg
- Probe A
- Probe B
- Probe C (torso)
- Probe C (torso) Aluminium
- Probe D (large head)
- Probe D (large head) Aluminium
- Probe E (small head)
- Probe E (small head) Aluminium
- Ring gauge
- Test rod, Ø 8.6 mm
- Test rod Ø 12 mm
- Test template for assessment of head and neck entrapment
- Toggle test device
- EN14619 - Kick scooters
- EN14960 - Inflatable play equipment
- EN15312 - Free access multi-sports equipment
-
ASTM F963 - Toy safety
- Accessibility probe A
- Accessibility probe B
- Clamps with jaws, 3/4 in. diameter washers
- Diameter rod 1/2 in. (13 mm)
- Diameter rod 1/4 in. (6 mm)
- Diameter rod 5 mm
- Durability Test for vertically opening hinged lids
- Expanding toy test template
- Flexure Tester
- Gripper jaws
- Head Probe for Cords and Elastics
- Hook test fixture for cords and loops
- Hooks for tire removal 1/16 in.
- Hooks for tire removal 1/8 in.
- Improvised projectiles – Discs
- Improvised projectiles – Shafts
- Improvised projectiles – Spheres
- Inclinable Platform
- Measuring device for the durability of mouth actuated toys
- Nickel disc
- Pacifier Test Fixture
- Rattle Test Fixture
- Rigid metal disc for compression test
- Self-adhesive for Sharp edge test equipment
- Set of Improvised projectiles
- Set of test templates
- Sharp edge test equipment
- Sharp point tester
- Small parts cylinder
- Static load 1 year
- Static load 2 years
- Static load 3 years
- Static load 4 years
- Static load 5 years
- Steel ball
- Supplemental Test Fixture for Rattles, Squeeze Toys, and Teethers
- Tension Test Clamp
- Test bench for impact test
- Test Fixture for Small Balls
- Test fixtures set for jaw entrapment
- Tip assessment gauge
- Torque clamp
- Weight 3lb
- Weight 70 lb
- ASTM F1148 - Home Playground Equipment
- 16 CFR 1500
-
ISO8124 - Safety of toys
- Accessibility probe A
- Accessibility probe B
- Cylindrical gauge for measurement of projectile tips
- Edge Test Apparatus
- Finger rod diameter 12 mm
- Finger rod diameter 5 mm
- Finger rod diameter 6 mm
- Gripper jaws
- Head Probe
- Impact test bench for magnets
- Improvised projectiles Discs
- Improvised projectiles Shafts
- Improvised projectiles Spheres
- Inclinable platform
- Loads for determination of dynamic strength
- Loads for determination of strength and stability
- Metal disc for compression test
- Nickel disc
- Platform for dynamic strength test for toy scooters
- Platform for dynamic strength test with stabilizers
- Point Tester
- Protrusion test gauge ø13
- Protrusion test gauge ø26
- Protrusion test gauge ø38
- Protrusion test gauge ø77
- Seam clamp with jaws with attached discs ø19 mm
- Set of Improvised projectiles
- Set of Protrusion test gauges
- Set of test templates
- Small parts cylinder
- Steel ball
- Steel needle
- Steel plate, thickness 4 mm
- Supplemental test template B
- Tape for Sharp Edge Tester
- Tension Test Clamp
- Test device for the flexibility of metallic wires
- Test template A
- Test template C
- Torque clamp
- ISO 25649 - Floating leisure articles
-
EN71 - Toy safety test equipment
-
Furniture
- EN581 - Outdoor furniture
-
EN716-2 - Children’s cots and folding cots
- 7 mm Finger probe for mesh
- Ball chain loop with spherical mass
- Bite tester
- Bottom impactor
- Conical probe ∅25 mm
- Conical probe ∅45 mm
- Conical probe ∅60 mm
- Conical probe ∅65 mm
- Conical probe ∅85 mm
- Cylindrical probe ∅12 mm
- Cylindrical probe ∅18 mm
- Cylindrical probe ∅5 mm
- Cylindrical probe ∅7 mm
- Cylindrical probes Set
- Foothold template
- Large head probe
- Loading pad 100 mm
- Mass 20 kg
- Retaining blocks
- Side impactor
- Small head probe
- Small parts cylinder
- Test dummy
- Test mass
- Test mattress
- V and irregular shaped openings template
- EN747 - Bunk beds and high beds
- EN1022 - Seating
- EN1130 - Cribs and cradles
- EN1728 - Seating
- EN1729 - School Chair Measuring Device SCMD
- EN1730 - Tables
-
EN1930 - Safety barriers
- Ball chain loop with spherical mass
- Finger probe for mesh ∅ 7 mm
- Finger probe ∅ 12 mm
- Finger probe ∅ 5 mm
- Finger probe ∅ 7 mm
- Finger probes set
- Foothold template
- Hip probe
- Push – pull test equipment
- Rattle test equipment
- Small parts cylinder
- Test frame
- Test impactor (without frame)
- Test impactor with frame
-
EN12221-2 - Test equipment
- Bath test base
- Finger probe ∅ 12 mm
- Finger probe ∅ 7 mm
- Finger probes
- Head probe 1
- Head probe 2
- Loading pad ∅ 100 mm
- Measuring cone 25mm
- Measuring cone 45 mm
- Measuring cone 65 mm
- Measuring rod for test beam
- Side impacter
- Small parts cylinder
- Steel ball
- Test beam with measuring rods
- Test beam with measuring rods
- Test cylinder
- Test mass
- Tube
-
EN12227 - Playpens for domestic use
- 7 mm probe for mesh
- Ball chain loop with spherical mass
- Base impacter
- Bite tester
- Feeler gauge
- Finger probe ∅ 12 mm
- Finger probe ∅ 7 mm
- Finger probes
- Foothold template
- Hip probe
- Large head probe
- Loading pad ∅ 100
- Mass 15 kg
- Mass 20 kg
- Patin de charge
- Retaining blocks for strength of mesh
- Side impacter
- Small head probe
- Small parts cylinder
- Template for V and irregular shaped openings
- EN12722 - Assessment of surface resistance to dry heat
- EN12727 - Ranked seating
- EN13759 - Operating mechanisms for seating and sofa-beds
-
EN14988-2 - High chair test equipment
- Angle measuring device
- Beam for height of lateral protection test
- Beam for height of lateral protection test
- Beam for stability test and for measurement of the lateral protection length
- Feeler gauge
- Footrest vertical static load 20 kg
- Impact hammer
- Impactor 23 kg
- Large head probe
- Leg probe
- Load 15 kg
- Loading pad ∅100
- Probe for finger entrapment 12 mm
- Probe for finger entrapment 7 mm
- Probes for finger entrapment
- Rubber mat
- Seat vertical static load 40 kg
- Small loading pad
- Small parts cylinder
- Small torso probe
- Test dummy
- Test load
- Test mass D
- Wedge block
- Wood block
- EN16122 - Domestic and non-domestic storage furniture
- EN17191 - Seating for Children
- ASTM F2388 - Baby changing tables
- NF D60 -300-1 - Mobilier pour jeunes enfants
- NF D60 -300-4 - Mobilier pour jeunes enfants
- Consumer goods
- Electrical Safety
-
Personal Protective Equipment (PPE)
- EN364 - Personal protective equipment against falls from a height
- EN388 - Protective gloves against mechanical risks
- EN420 - Protective gloves
- EN863 - Protective clothing - Puncture resistance
- EN12277 - Mountaineering equipment - Harnesses
- EN13087 - Protective helmets
- EN14120 - Wrist, palm, knee and elbow protectors for users of roller sports equipment
- Medical equipment
-
And many others
- NF P08-301 - Ouvrages verticaux des constructions
- NF P09-306 - Barrières de protection pour piscines
- NF P90-309 - Éléments de protection pour piscines
- NF S 52-409 - Equipements sportifs
- ISO7892 - Vertical building elements - Impact resistance tests
- EN949 - Windows and curtain walling, doors, blinds and shutters
- EN14428 - Shower enclosures
- EN16433 - Internal blinds - Protection from strangulation hazards
- EN16582 - Domestic swimming pools
- BS7272 - Writing and marking instruments
- EN913 - Gymnastic equipment
- EN1860 - Barbecue
- EN 50636-2-107 - Safety of household and similar appliances
- EN61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use
You are here :
News
2019 : Hong Kong Toy Fair & SPIELWARENMESSE
Save these 2 dates :
Lefort Testing will be exhibiting at the Hong Kong Toy Fair (07.01.-10.01.2019) in Hong Kong in the Testing, Inspection & Certification Zone.
Our booth will be located in hall 3D-D39.
Lefort Testing will be exhibiting at the Spielwarenmesse (31.01.-03.02.2019) in Nuremberg/ Germany in the Testing & Inspecting Center.
Our booth will be located in hall Hall 11.1/H06.
Contact us to get a quote for our toy test equipment or to schedule an appointment!
Lefort Engineering SAS - 14 Boulevard Jacques Cassini - ZI du Cormier - 49300 CHOLET - FRANCE
Tél : +33 (0)2 41 58 41 65 - info@lefort-testing.com
Date of creation : MonaGraphic - Copyright ©2018 Lefort Testing